How can I cover my basement walls

Fortunately, you can cover basement foundation walls quickly and inexpensively. Attach wood furring strips, Z-shape channels, or 2×4 studs to flat, dry masonry walls, then add insulation and cover the strips or studs with drywall.

What can I use to cover my basement walls?

If installing drywall panels, use moisture- and mildew-resistant drywall. When insulating concrete basement walls (a good idea because concrete basement walls are often cold), use rigid foam board insulation if the insulation will come into direct contact with the concrete wall.

How can I cover my basement walls cheaply?

Fortunately, you can cover basement foundation walls quickly and inexpensively. Attach wood furring strips, Z-shape channels, or 2×4 studs to flat, dry masonry walls, then add insulation and cover the strips or studs with drywall.

How do you make a concrete basement wall look good?

If your concrete-block basement walls are dry and free of efflorescence or mold, you can seal them with a masonry sealer or all-purpose water-base primer-sealer and paint with a high-quality latex paint. Paint is an easy way to make the basement feel warmer, brighter, and more welcoming.

What can I use instead of drywall in my basement?

• Wood Planks.
• Plastic Panels.
• Plywood.
• Veneer Plaster.
• Pegboard.
• Lath and Plaster.
• Wahoo Walls.
• Textured Wall Panels.

How do you cover rough concrete walls?

Roll liquid concrete bonding agent over the surface of the wall in fairly straight lines using a short-napped paint roller. Make sure you cover the entire wall. Wait about five minutes for the product to firm up and become sticky.

Can you put wallpaper over concrete walls?

Wallpaper will adhere to drywall, new and old plaster, concrete, masonry, and paneling. You can even wallpaper over slick, nonporous surfaces, such as tile, concrete block, or synthetic laminate paneling.

Can you finish a basement without drywall?

The alternatives besides drywall or studs that can be used to finish your basement wall are wood planks, plastic panels, veneer plaster, wahoo walls, plywood, and pegboards. These options are easy to set up and maintain compared to drywall or studs that have problems with moisture and dust.

Can you plaster over concrete walls?

Applying plaster to a concrete wall can change its appearance, level it, make it more moisture-resistant and give you the opportunity to add texture. Plastering a concrete wall takes time. You will have to prepare the wall and allow for curing and drying time between applications of plaster.

How can I save money to finish my basement?

1. Opt for an inexpensive, prefabricated egress window and well. …
2. Test exterior walls for moisture before finishing. …
3. Cut out some studs. …
4. Install drop ceilings. …
5. Skip the carpet and install luxury vinyl tile instead. …
6. Add a bathroom (or at least a half bath) near existing plumbing.

Article first time published on

Is it OK to paint basement concrete walls?

Painting your basement walls can do more than just improve the look of your home; it can protect your foundation from water damage and moisture. … For concrete walls, use a waterproof sealant to seal the porous material, and opt for a waterproof masonry paint to finish the job.

What is the cheapest way to cover a wall?

1. Foam board.
2. Large art prints.
3. Starched fabric wall covering.
4. Loose fabric wall covering/curtain.
5. Tapestry wall hanging.
6. Vinyl wall decals.
7. Peel and stick wallpaper.
8. Mirrors.

Will peel and stick wallpaper work on concrete walls?

While removable wallpaper and wall murals work on most surfaces, there are a few types of walls that are not best for them. Wall murals are not recommended on any textured surfaces like brick, concrete, cloth, or textured walls.

Can you wallpaper basement walls?

Things You’ll Need Patterned wallpaper works best on cement walls. If you have a room with cement walls, such as a dorm room or a basement, and think your only option for wall color is paint, you’re wrong. Even if the surface is rough, you can still hang wallpaper to give your room an added flair.

How do you hide cinder block walls?

Concrete. The simplest way to cover a cinder block wall is by using surface bonding cement to create a concrete finish. Concrete helps insulate the building and keep moisture out. It creates a smooth, finished surface you can leave as is or paint.

How do you finish a concrete basement wall?

1. Seal the Wall. Use a paint roller to apply the masonry waterproofing product you choose. …
2. Install Blocking Between Joists. …
3. Snap Lines on the Floor. …
4. Assemble the Walls on the Ground. …
5. Tip Up the Walls. …
6. Plumb the Wall and Secure the Top Plate. …
7. Build Out Around Windows.

How do I sand my basement walls?

1. Wash the walls with dishwashing soap and water. …
2. Attach a diamond sanding pad to a hand-held grinder. …
3. Press the grinder to the wall and begin applying firm pressure. …
4. Wipe the walls with a damp towel to remove the sanding dust.

What kind of paint do you use on concrete walls?

Masonry paint (also called elastomeric paint or elastomeric wall coating) is a good choice for concrete painting because it contains binders that contract and expand with the concrete. Exterior house paint can crack and peel on concrete.

Can I put drywall over concrete?

You can put drywall over concrete, but it is important to be mindful of the process. Drywall should never be installed directly to a concrete slab, and should be installed over a barrier wall to prevent any type of moisture transfer, which could create mold and damage the drywall.

How do I know if my wall is plaster or concrete?

If there’s no drywall, just knock on the wall. If the wall feels as hard as concrete, it probably is. If there is drywall, take a drill and a very small bit and drill a hole somewhere inconspicuous. If the bit stops going after an inch or two the wall is concrete.

Can you use spackle on concrete?

Unfortunately, common spackling products do not adhere to concrete. Concrete patch is used for repairs of holes or large cracks, while a paste of Portland cement and water or a concrete caulking product are suitable for smaller hairline cracks.

What is the cheapest way to finish a basement ceiling?

Thin wood paneling — typically 1/8- to 1/4-inch thick — can cover an exposed ceiling, and it’s available in a variety of designs. Fir plywood, hardboard, even oriented-strand-board (OSB) are even more affordable, but these less-expensive options typically require paint or sealant.

How can I make my basement livable without finishing it?

1. Keep the ceiling exposed. …
2. Ditch the drywall. …
3. Capture the power of white. …
4. Establish a focal point. …
5. Get creative with paint and decor. …
6. Install cabinetry. …
7. Just do the basics. …
8. Dress up with shine.

Can Plywood be used instead of drywall?

Plywood is a viable alternative to drywall for walls and ceilings. If you are planning on redoing your walls or ceilings, the typical materials you’ll use include Sheetrock or finished plywood. Each has its benefits as a building material and in some cases, finished plywood is the better alternative.

What is the most expensive part of finishing a basement?

Breaking down the cost to finish a basement Flooring and wall coverings like paneling are the biggest expenses, making up approximately 15% of the total cost to finish a 1,200 square-foot basement, Sebring says.

What is the cheapest way to finish an unfinished basement?

If you’re wondering if paneling or drywall is the cheaper finishing option, generally speaking, drywall is cheaper than paneling. This is because it requires less attention to detail and finish work during the installation process. Drywall also adds better soundproofing than paneling, and it’s easier to repair.

What is the best flooring for a basement?

What basement flooring options and materials are the best? The best type of flooring for basements is vinyl. Vinyl flooring can come in the form of vinyl plank and vinyl tile, giving it the ability to look nearly identical to hardwood and stone products with the added benefit of being waterproof.

Is Drylock good for basement walls?

Drylok is a product that is used to stop water seepage on interior masonry walls. It is supposed to seal basement foundations, primarily block foundations but I’ve seen it on concrete as well. Of course, the reason you need to seal any basement foundation is because the foundation is porous.

Is it bad to paint basement walls?

DO NOT PAINT YOUR WALLS, even with Drylok or waterproofing paint. Concrete does not support fungal (mold) growth. … Also, do not attach insulation directly to the foundation walls. It behaves as a moisture trap and can also hide structural problems and cracks in the foundation.

Can you paint cinder block basement walls?

Paint the cinder block wall with a thick coat of masonry waterproofing paint, pushing paint into cracks and crevices of block. A paint roller or brush made specifically for masonry is best. Allow to dry overnight or for a minimum of 12 hours between coats.

How do you cover a wall without painting it?

1. Temporary Wallpaper. Temporary wallpaper is a thing, and is especially becoming a popular design trend in the USA. …
2. DIY wall design using Masking Tape. …
3. Hanging Art/Photos. …
4. Wall Decals. …
5. Tile Transfers. …
6. Stretched Fabric & Tapestries. …
7. Shelves. …
8. Bamboo blinds.