How do I stop a thick smear

Protect thick smears from hot environments to prevent heat-fixing the smear. Do not fix thick smears with methanol or heat. If there will be a delay in staining smears, dip the thick smear briefly in water to hemolyse the RBCs.

How do you fix a thick blood smear?

Protect thick smears from hot environments to prevent heat-fixing the smear. Do not fix thick smears with methanol or heat. If there will be a delay in staining smears, dip the thick smear briefly in water to hemolyse the RBCs.

What are the factors that affect the thickness and thickness of a blood smear?

The perfect quality smear is influ- enced by three factors: speed, angle and drop size. thinner the smear will be. The slower the slide is moved, the shorter and thicker the slide will be.

Why thick smear is not fixed?

Thick smear. It is not fixed in methanol; this allows the red blood cells to be hemolyzed, and leukocytes and any malaria parasites present will be the only detectable elements.

When is the best time to get malarial smear preparation?

BLOOD SHOULD BE COLLECTED IMMEDIATELY UPON SUSPICION OF MALARIA, although the optimum time is about midway between chills to ensure obtaining stages on which species identifications can be made. Since single blood smears may not reveal organisms, successive smears at 6, 12 or 24 hours are sometimes necessary.

What is the purpose of thick smear?

A thick blood smear is a drop of blood on a glass slide. Thick blood smears are most useful for detecting the presence of parasites, because they examine a larger sample of blood. (Often there are few parasites in the blood at the time the test is done.)

How do you make Giemsa stain stock solution?

1. Dissolve 3.8g of Giemsa powder into 250ml of methanol.
2. Heat the solution from step 1 to ~60oC.
3. Slowly add in 250ml of glycerin to the solution from step 2.
4. Filter the solution from step 3.
5. The solution needs to stand a period of time prior to use.

How do you stain a thin film with Giemsa?

1. On a clean dry microscopic glass slide, make a thin film of the specimen (blood) and leave to air dry.
2. dip the smear (2-3 dips) into pure methanol for fixation of the smear, leave to air dry for 30seconds.
3. Flood the slide with 5% Giemsa stain solution for 20-30 minutes.

Which structures does Giemsa stain?

It can be used for histopathological diagnosis of malaria and some other spirochete and protozoan blood parasites. Giemsa/Wright’s stain is a classic blood film stain for: peripheral blood smears and bone marrow specimens. platelets show a light pale pink.

How do you adjust the thickness of a smear for high hematocrit?

Working with Blood with High Hematocrit Levels You must push more slowly to ensure that the blood spreads far enough down the slide. Using a larger drop size can help get enough blood to spread the desired two-thirds to three-fourths of the length of the slide. You can also change the angle of the pusher slide.

Article first time published on

What happens if neutrophils are high?

If your neutrophil counts are high, it can mean you have an infection or are under a lot of stress. It can also be a symptom of more serious conditions. Neutropenia, or a low neutrophil count, can last for a few weeks or it can be chronic.

What causes Echinocytes?

1 Echinocytes When observed in stained blood films, echinocytosis is usually an artifact that results from excess EDTA, improper smear preparation, or prolonged sample storage before blood film preparation. Echinocytes form when the surface area of the outer lipid monolayer increases relative to the inner monolayer.

How do you dilute Giemsa for malaria?

The fixation of blood smears in methyl alcohol or the use of the May-Grunwald staining solution (1) is followed by the use of Giemsa stain for 25 to 30 min. Giemsa stain (3 ml) is diluted with buffered distilled water (100 ml) and is the stain of choice for demonstrating the presence of parasites in blood smears.

Is Giemsa an alcoholic stain?

Alcohol-based stains, such as Giemsa or Leishman, are suitable for both thin and thick smears and are most commonly used in better equipped laboratories with availability of well trained personnel.

What is the difference between thick and thin smear?

A thick blood smear is a drop of blood on a glass slide. A thin blood smear is a drop of blood that is spread across a large area of the slide.

How Long Should personnel continue to take anti malaria medication?

Quinine treatment should continue for 7 days for P. falciparum infections acquired in Southeast Asia and for 3 days for infections acquired elsewhere; clindamycin treatment should continue for 7 days regardless of where the infection was acquired.

How is microfilaria diagnosed?

The standard method for diagnosing active infection is the identification of microfilariae in a blood smear by microscopic examination. The microfilariae that cause lymphatic filariasis circulate in the blood at night (called nocturnal periodicity).

What does malaria look like on a blood smear?

Examination of Giemsa-stained peripheral blood smear is the standard test for the diagnosis of malarial infection. Classic ring-shaped/headphone-shaped trophozoites are seen in case of Plasmodium falciparum infection. Cerebral malaria is a complicated form of malaria which is most commonly associated with P.

What is Giemsa working solution?

A freshly prepared working solution of Giemsa, made from well-prepared stock and diluted with water. buffered to pH 7.2 is recommended to achieve optimal staining of malaria blood films. Giemsa stock. solution procured for national programmes is standardized to minimize frequent adjustments to SOPs on staining.

How do you make a 5% Giemsa solution?

1. Dissolve 3.8g of Giemsa powder within 250ml of methanol.
2. Heat the solution at 60oC.
3. Add 250ml of glycerin.
4. Filter the solution.
5. leave the solution to stand for about 1-2 months before use. Store the solution in a cool, dark place.

Is Giemsa stain acidic or basic?

Principle of Giemsa Stain Azure and eosin are acidic dye that variably stains the basic components of the cells like the cytoplasm, granules etc. Methylene blue acts as the basic dye, which stains the acidic components, especially the nucleus of the cell. Methanol act as a fixative as well as the cellular stain.

How does Giemsa stain work?

Giemsa solution is composed of eosin and methylene blue (azure). The eosin component stains the parasite nucleus red, while the methylene blue component stains the cytoplasm blue. The thin film is fixed with methanol. De-haemoglobinization of the thick film and staining take place at the same time.

Why do we fix thin film in methanol?

Thin films must be fixed with methanol to preserve all of the details which enable detection and identification of malaria parasites. Thick films are a concentration method. They consist of many layers of RBC stacked on top of each other. Thick films should not be fixed with methanol (or direct heat).

How do you see a malaria slide?

Malaria parasites can be identified by examining under the microscope a drop of the patient’s blood, spread out as a “blood smear” on a microscope slide. Prior to examination, the specimen is stained (most often with the Giemsa stain) to give the parasites a distinctive appearance.

Is Giemsa stain toxic?

Ingestion Harmful if swallowed. Harmful if absorbed through skin. Causes skin irritation. Eyes Causes eye irritation.

What are giemsa bands?

G-banding, G banding or Giemsa banding is a technique used in cytogenetics to produce a visible karyotype by staining condensed chromosomes. … Banding can be used to identify chromosomal abnormalities, such as translocations, because there is a unique pattern of light and dark bands for each chromosome.

Is Giemsa stain a romanowsky stain?

Romanowsky staining, also known as Romanowsky–Giemsa staining, is a prototypical staining technique that was the forerunner of several distinct but similar stains widely used in hematology (the study of blood) and cytopathology (the study of diseased cells).

What is the best stain for peripheral smear?

Commonly used stain in our environment is Leishman stain which is composed of polychrome methylene blue (basic component) and eosin (acidic component). May-Grunwald Giemsa or Wright-Giemsa stain can also be used.

How do you make Wright-Giemsa stain?

Dissolve 1 buffer tablet in 1 liter of distilled water while stirring. Filter after dissolving. Working solution must be prepared in 1:3 ratio (for instance, add 30 ml of Wright-Giemsa solution to 60 ml of Buffer solution, pH 6.8 or 7.2 and stir well).

What is a spun smear?

Blood smears were prepared with the use of a spinner, which rotated with a fixed velocity for a fixed time. All blood samples used for spun smears were diluted with a fixed ratio of buffered isotonic saline solution. Distribution of cells in these smears was found to be random.

What are the common errors in making a thick and thin blood film?

• too long or too thin. spread slide angle too low. …
• too short or too thick. spreader slide angle too high. …
• waves or ridges. hesitation while pushing spreader slide. …
• holes in smear. dirty slide. …
• abnormal cell morphology/artifacts. improper drying of smear. …
• uneven cell distribution.